Properties BIOPOL XMC 1 water-based broad-spectrum biocide from CMIT, MIT and BIT. It is used for a wide range of aquatic products. BIOPOL XMC 1 does not contain formaldehyde and its donors, VOCs and AOX.
Scope and dosage
BIOPOL XMC 1 is ideal for paints and adhesives. The dosage should be determined experimentally, working range from 0.10 to 0.30% depending on the application.
Physical properties
White, slightly thick liquid with a characteristic odor. Density 1.025 + 0.010, pH 3 — 5, Completely soluble in water.
Recommendations for use
BIOPOL XMC 1 is completely soluble in water and conventional polar solvents. Stable in the pH range between 2 and 10 and withstands temperatures of d at 80ºC. It is recommended to add in the first stages of production. Be careful with temperature and pH. Avoid strong oxidation conditions. Can be used up to 0.25% without additional markup
Effective against the following microorganisms:
Bacillus subtilis, Candida albicans, Escherichia coli, Aspergillus niger, Pseudomonas aeruginosa, Saccharomices cerevisiae, Staphylococcus aureus, Pseudomonas fluorescens
General information on storage, safety and transportation
BIOPOL XMC 1 is safe to transport, but should be marked, XN. For more information, see the safety map. Avoid freezing, strong heat, and direct sunlight. Store at room temperature in original packaging. Original packaging: canisters of 25 kg.
Properties BIOPOL JM 15 is a broad-spectrum tar biocide for aquatic systems based on CMIT/MIT combination (5-chloro-2-methyl-4- isothiazolin-3-one, 2-methyl-2H -isothiazol-3-one) The product is excellent for storing a wide range of aquatic products and has good system protection efficiency in volume. It has a good balance of effectiveness and a low risk of allergic reaction on contact.
Scope and dosage
BIOPOL JM 15 is an tar preservative recommended for water-based paints and plasters, polymer dispersions, adhesive materials and sealants. The optimal rate of administration of BIOPOL JM 15 should be determined by laboratory tests, but the recommended dosage is 0.05 - 0.30% depending on the application.
Physical properties
Transparent, almost colorless or slightly yellowish liquid with a characteristic odor. Density 1.05 + 0.01, pH 2.0 — 5.0, Completely soluble in water.
Recommendations for use
BIOPOL JM 15 product is completely soluble in water and polar solvents. Stably works at pH 3 - 9 and temperatures up to 60ºC. It is recommended to introduce at the initial stages of preparation of the composition.
Effective against the following microorganisms:
Bacillus subtilis, Candida albicans, Escherichia coli, Aspergillus niger, Pseudomonas aeruginosa, Saccharomices cerevisiae, Staphylococcus aureus, Pseudomonas fluorescens
General information on storage, safety and transportation
BIOPOL JM 15 is classified as a dangerous product in transport and is denoted by the stimulus label (Xi). For more information, see the safety map. Avoid freezing, strong heat and direct sunlight. From frost, heat and direct sunlight. Store at 5 - 40ºC in the original packaging. Available packing: 60kg barrels and 1000kg IBC containers.
Properties BIOPOL® C 103L is a rapid disinfectant antimicrobial agent based on DBNPA (2,2-dibrom-3-nitrilopropionamide). Advantages of the product: Fast and effective antimicrobial action. Economical. Low toxicological profile.
Scope and dosage
BIOPOL® C 103L is a product with a predominantly disinfectant effect, therefore it is used either for the treatment of products in which there is contamination by microorganisms or as a preventive agent against contamination, for example, for process water. After dosing the product and completing disinfection, BIOPOL® C 103L decomposes, releasing harmless chemicals. As a general rule, the typical dose of use is between 0.05 and 0.20%. The level of use depends on the characteristics of the product to which the drug is added and the environmental conditions in which it is used.
Physical properties
Light yellow transparent liquid with a characteristic odor. Density 1.24 — 1.26, pH 3.0 — 5.0, Completely soluble in water.
Recommendations for use
BIOPOL® C 103L is completely soluble in water and the most common polar solvents. It remains stable when used up to a pH value of 8; at higher values, it quickly hydrolyzes, losing its effectiveness and not properly performing the functions of a disinfectant. Prolonged exposure to sunlight can cause discoloration.
Effective against the following microorganisms:
Bacillus subtilis, Aspergillus sp., Escherichia coli, Candida albicans, Pseudomonas aeruginosa, Penicillium sp., Staphylococcus aureus, Rhodotorula sp., Pseudomonas fluorescens, Saccharomyces cerevisae
General information on storage, safety and transportation
Packing:Barrel, 30 kg net. Barrel, 250 kg net. Standard IBC container, 1250 kg net.
Shelf life: It is recommended to use within 12 months from the date of manufacture.
Storage:Store in a cool dry place at a temperature of 0 ºC to 40 ºC, protecting from frost, heat and direct sunlight, in the original tightly closed container.
Transportation and labeling.It is not classified as a dangerous product for transportation.
Handling:It is recommended that you handle it following the typical safety precautions for this type of chemical, including protective clothing, overalls, gloves, goggles and face protection. Avoid contact with skin, eyes and mucous membranes. Use chemicals safely. Always read the label and product information before use.
Properties FUNGIPOL-351 broad-spectrum fungicide based on algicide in combination with octyl isothiazolone, carbendazim and diuron. It is effective against fungi, algae and yeast.
Scope and dosage
FUNGIPOL-351 is an ideal film preservative recommended for water-based paints and plasters, polymer dispersions, adhesive materials, sealants and plastics. The dosage should be selected individually, but we can recommend a dose in the range of 0.5 — 1.0%.
Physical property
Ibeige-gray thick liquid with a characteristic odor. Density 1.1 + 0.01, pH 6.0 — 8.0, Dispersible in water.
Marking
< 0.15% -- No labelling
> 0.15% < 0.99% -- R52/53
>1.0% < 1.25% -- T R46-52/53 S45-53-60-61-37
> 1.25% -- T, N R46-51/53 S37-45-53
Recommendations for use
Stable at pH up to 11 and temperatures up to 200 °C. Add after the grinding stage.
Effective against the following microorganisms:
Fungus and yeasts Algae, Alternaria alternata, Ankistrodesmus falcatus, Aspergillus spp., Chlorella pyrenoidosa, Chaetomium globosum, Coccomyxa elongata, Penicillium funiculosum, Scenedesmus obliquus, Candida albicans, Phormidium spp.
General information on storage, safety and transportation
FUNGIPOL-351 is classified as a hazardous product in transportation and labeled as toxic T, and hazardous to environments, N. For more information, see the safety map. Avoid freezing, strong heat and direct sunlight.. Shelf life 1 year. Original packaging: canisters of 25 kg.